GODIAG GT107 ECU IMMO Kit is a DSG gearbox connection adapter.This adapter has automatic and manual selection for PCMFlash software. For data reading and writing, you can choose “Auto”, and for diagnosis you can choose ”Manual”. For other software kessv2, DQ200, DQ250, DQ500 you can also choo Continue Reading →
How to solve KESS V2 Ksuite 2.80 application error ‘The application failed to initialize properly 0xc0150002’? Check the advice offered by eobdtool.co.uk engineer.
The possible cause:
“Application Error” is an error that basically means that your computer is unable to process the files and Continue Reading →
Here you will learn the newest software ksuite 2.80 for kess v2 installation & user guide.
Kess V2 Ksuite 2.80 software free download:
Kess V2 V2.80 Software Download for Free
Size: 3.35 GB
Security: No risk!
Note: If you don’t have a Chinese Weiyun account, please feel fr Continue Reading →
Here share a real customer test report about using Kess V2 Ksuite 2.23 fw V5.017 to read and write ECU data on a 2009 Mercedes- Benz Sprinter via OBD.
Mercedes- Benz Sprinter 2009 (ECU: DELPHI DCM3.5)
Kess V2 clone, SW Ksuite V2.23, FW V5.017 (EU version)
Main operation Continue Reading →
Have purpose to read / write Siemens PCR2.1, Kess v2 or Ktag master with Ksuite software is tested the most stable than other ECU programmers.
Kess V2: Confirmed
Kess V2 2.70 CAN read & write greatly PCR2.1 on the benchmark after unlock, not ktag or you can read through OBD with Kess. It Continue Reading →
Ksuite V2.70 free download for Kess V2 V5.017: https://share.weiyun.com/WF3yWyuZ (password: g311lg). After downloading it, please install it on any of windows XP, win7 /8 /10.
Ksuite V2.70 Test Reports:
– well my ksuite loads a bit faster than 10-20 sec because i have an i7 processor and Continue Reading →
Have a corsa c 2006 1.2 80hp ME 7.6.2 to read with kess galletto and mpps, I need to explain step by step how to read this ecu… the power supply are 12.8v 1 A.
Before it is working, I connect the wire like this:
-2 red wire on the +12V pin 18 and 51
-1 black wire from gnd pind 5
– fr Continue Reading →
uobdii.com engineer tested the newest Ksuite 2.70 software working greatly with Kess V2 5.017 / Ktag 7.020 EU version or Chinese clone online version. Compare with Ksuite 2.53, 2.70 fixed the bugs, reduce errors (like wake up error), optimize running speed etc.
Meanwhile some users also feedbac Continue Reading →
Customer problem: When I run Ksuite 2.53 on my kess v2 master, a message error appeared on the screen “External exception EEFFACE”. I tested with another cable and tested on another port… but the results were always the same. It is normal for the computer to detect as usb device. I also tried Continue Reading →