Free Download ECU Tuning Software for PCMtuner/KT200/Kess V2/KTAG, etc
Here EOBDTOOL.CO.UK offers some ECU tuning software (such as DTC Remover184.108.40.206 + immo off+ ecu safe solutions) for free download. No need activation! Just contact our customer service to get for your PCMtuner/KT200/Kess V2/KTAG, etc.
What ECU tuning software is provided?
- ADS-DPF EGR Lamdba Remover 05.2017 FULL.rar
- DTC Remover 220.127.116.11
- EasyKill v2.0.rar
- ecu safe solutions 2 versions
- Hard Cut
- Immo Universal 3.2 version
- Immo Universal Decoding 3.2
- Immooff 17 V2.1162
- VAG EDC15 IMMO OFF
- VAG EDC16 IMMO OFF
What can each ECU software do and how to use?
- ADS-DPF EGR Lamdba Remover 05.2017 FULL.rar
DPF EGR Lambda Remover [05.2017] software + keygen unlimit
FULL DPF/EGR/LAMBDA AND KEYGEN..so you can do it yourselves multiple times
v2017.05 ACTIVATION DPF EGR Lambda Adblue Flap DTC Hotstart Remover v2017.05
BEST PRICE EVER
DPF-FLAP Remover v2017.5
EGR-DTC Remover v2017.5
LAMBDA Remover v2017.3
Win7, Win 8, Win 10
Maybe it is detected as False Positive by some AntiVirus Programs, so don’t worry, is normal.
This programs they are very easy to use, even for a beginner, you just need to select the right car and ECU.
If you have selected the ECU of your Car then the program will make the solution DPF or EGR OFF automatically.
3 steps to do software:
- 1 – Select the car model
- 2 – Load the file to fix
- 3 – Save the final FIXED file.
All operations they are done by software automatically. Users just need to read – write the files with the well known equipment’s to ECU.
LANGUAGES SUPORTED: Multilanguage.
No Internet needed, No count, No any limit, No-Limit files!
***Exclusive Package FULL PACK*** >(3 program 9 module)< >( NEW VERSION V2017.5.1 )< All in one…
- DTC Remover 18.104.22.168 with activator
This application will allow you to turn off the MIL light on your dash, this is done by disabling the relative OBD P-Code from internal ECU logic.
How it works:
- Select the ecu model from the list.
- Load the file that was read from ECU
- Insert the OBD P-Code or manufacturer specific fault code that your diagnostic tool is showing
- Press DTC OFF
- Pepeat steps 3 & 4 for multiple codes
- Press SAVE
Software files are modified and your antivirus protection may detect some software files as a virus or unwanted program.
It is a false detection. This software is used by hundreds of car enthusiast without any problems.
- EasyKill v2.0
This tool is used to deactivate various features such as:
Torque monitoring off
rev limiter etc.
- ECU Safe Solutions 2 Versions (ECU Safe 2.0)
ECUSafe is a program that protects program in ECU against being read with all OBD flashers or programmers including:
– Alientech KESS, KESS2
– Dimsport Genius
– Heron Katana Flash
– all other OBD K-line or CAN flashers – original and clones.
You can write new program with any tool you want. Manufacturer’s service workshop can do all diagnosis and even write upgraded version of program into ECU. But nobody can read your work via OBD or CAN.
After reading original file from car and making chip file from it, protection using ECUsafe may be applied. Protected file may be written into ECU using your flash tool (if it calculates file checksum while writing) or you must calculate checksum in external program and then write it into ECU .
As a result file stored in ECU cannot be read anymore. Diagnosis protocols are working normally (you can do identification of ECU, diagnosis of error codes, etc etc). ECU can be re-written with any file using your tool (so factory diagnosis systems can upgrade program in ECU, if applicable). ECU cannot be read. Diagnosis protocols work normally.
All CAN and K-line reading systems will fail to read file from ECU. They can only write (and thus – overwrite your file). To re-enable reading file from ECU, it must be overwritten with non-protected file (file without ECUsafe protection).
- Hard Cut Limiter
This software will help you do ignition cut instead of fuel cut. Simply select a file, select the right ECU then choose a RPM to cut the ignition.
HARDCUT LIMITER / IGNITION CUT TOOL FOR VAG
– ME3.X / ME5.X
– ME7.1 / ME7.1.1 / ME7.5 / ME7.X
- ImmoOff 17 V2.1162
IMMOFF17 – EDC17 MED17 EEPROM IMMO DISABLER
This is the EEPROM IMMO OFF solution for newer ecu and covering all EDC17 and MED17 version, for AUDI VOLKSWAGEN SEAT SKODA AND MORE.
* WORK ON ALL EEPROM EDC17 MED17 FILES 32KB, 64KB or 128KB
* AUTO EEPROM IMMO PATCH
* AUTO EEPROM CHECKSUM CORRECTION
* ONE BUTTON PRESS
* THE RIGHT WAY TO IMMO OFF.
* NO DTC, NO DASH LIGHT AND NO DASH WARNING MESSAGE
The only tool to work on latest TPROT10.
IMMOFF17 – UPDATE INFORMATION:
Feature coming in next version:
Reset counter flash, reset obd prog status, edit vin, and more.
- VAG EDC15 EDC16 Immo Off
This software is a program that allow you to disable/enable immobilizer system for EDC15 and EDC16
5 steps to operate:
Step 1: Use programmer device read out the data file from 24C04 or 95320.
Step 2: Run VAG EDC 15 or EDC16 immo bypass software and select binary read out from 24C04 or 95320.
Step 3: Click “Bypass Immo” button, then it will generate a new file, save it on your PC.
Step 4: Write new file back to 24C04 or 95320 chip.
Step 5: Solder chip on PCB, and install all things back on vehicle to test car.