Foxflash software newest update on September 14, 2023: Fixed checksum for Bosch MED17/EDC17 incl. MCU TC1766 TC1793 TC1797 TC1724F TC1767 Update details: foxFlash is now able to perform the following operations: Software calculate checksum On the following ECU reference: Audi Bosch MED17.5 TC176 Continue Reading →
One customer failed to download Foxflash software and got the error “Unhandled exception in the application. If you click Continue, the application ignores this error and attempts to continue. If you click Exit. The application will close immediately. Could not read block- no data!” He asked “ Continue Reading →
Here is the newest customer feedback about Foxflash ECU Chip Tuning Tool. edc15 P+ BENCH Flash & eeprom Start EDC15C3 (bench)– from Renault Laguna/ Read/Write OK EDC15C13 (bench) — from Espace IV/ Read/ Write OK EDC15C4 Full Flash R/W OK – obd-bench with 12v edc15c13 renault BENCH Flash&a Continue Reading →
Some customers gave feedback that Foxflash Bench Box stopped working recently. The possible cause is the relay didn’t send 12v to ECU or the P channel mosfet burned. Check the corresponding solutions below. Case 1: The relay didn’t send 12v to ECU. The relay gives power. The blue bench b Continue Reading →
Customer problem: I want to use Foxflash ECU programmer to read and write MPC 55x/56x in BDM/Jtag mode. But when I run foxflash software, there is an error pops up “We remind you that your subscription is about to expire. Contact us to renew it…”. Eobdtool.co.uk engineer replied: It do Continue Reading →
Foxflash Bespoke ECU Programmer is a complete tool for reading and programming engine control unit via OBD and Boot mode and Jtag systems. Full system and Bench model also available. Fox Flash is a unique solution for mechatronics. TCU package for automatica transmissions available. Review Continue Reading →
Here are some Frequently Asked Questions about FoxFlash: Install on Win7 Win10 or Win11? The answer : you can work on Windows7 Windows10 Windows 11 but you need to use 64bits system . How to Unlock VAG Simos PCR2.1 ECU with Foxflash by OBD? Get Identity, and get an Ori, modify Ori and duri Continue Reading →
has the unlock service as hptuner. When you need unlock some ECUs then work with HPtuner, you can contact us get a unlock file, after a performance, then you can work with your HPTuner. Here are the operation steps. Step 1: Read all with foxFIash software in boot mode, make a full backup Continue Reading →
One customer reported that he downloaded Foxflash Manager but he failed to open the software, and received 2 errors “Fetech data: invalid JSON primitive.” and “There is an error in XML document (1, 3).” as shown in the figures below. For this problem, eobdtool.co.uk engineer gives the follo Continue Reading →
