Hi everyone! This instruction will show you how to read and write 1.8 turbo Bosch ME7.5 VW Golf using MPPS V18 clone via OBD. Something to know firstly: Very Important!!! Before doing reading or writing, make sure your battery is charged up or use battery charger. Otherwise you will brick your Continue Reading →
Here, have collected the installation videos of the best ECU programmer clone, incl. Ksuite V2.25 for Ktag V7.020, Ksuite 2.23 for Kess V5.017 and MPPS V18. How to install Ksuite V2 25 for Ktag V7 020 Video: How to install Ksuite 2.23 for Kess V5.017 Video: How to install MPPS V18 Video: L Continue Reading →
Good News!!! MPPS V18 software is compatible with the MPPS V21 hardware; MPPS V21 software is compatible with the MPPS V18 hardware; MPPS V21 software and MPPS V18 software can share the same hardware. Most importantly! the hardware WON’T BE LOCKED any more Anyway, there are a Continue Reading →
Share an experience of how to connect MPPS V18 to PSG16 to read ECU for remapping. here you go here you go mate made by myself its really easy just find can wires in the loom near the battery they are green and white in black pvc ,good luck mate. I cut wires without cutting wires i didn’ Continue Reading →
I have a MPPS v18 Chinese cheap clone and it works fine. It works with Windows 7 I have seen some talk about MPPS pcb (different colours) and tried to find out whats the different between eu or china tool. Personally, the color of the pcb plays no role at all. A red car is also not neces Continue Reading →
What is the difference between Chip Tuning and ECU Remapping? The difference is basically the age of the techniques used to obtain the cars “map file”. Nowadays you are very unlikely to get your car “chipped” due to the evolution of electronics and chips themselves. Basically, chip tuning is Continue Reading →
To answer this question, many opinions show on forum. People recommend KTAG, KESS V2, FGtech V54 no checksum error! Check their reasons below to know more: Most tools do checksum after reading ECU , KESS KTAG FGTECH MPPS. I bought a useful tool kit: KTAG plus KESS V2 with ECM TITANIUM 1.61 Continue Reading →
2017 MPPS V18 firmware updated! The new mpps v18 China comes with better protection components (imported, not made by Chinese). The left- 2017 mpps v18 with imported components protected firmware well The right- 2016 old mpps v18 china clone For details of 2017 mpps v18 from China, Continue Reading →
I’ll chip in my few words of experience of ECU tuning tools. MPPS V21- Mr Oliver sold me MPPS v21 without telling me that it needs to be re-flashed from time to time. Found out about it myself where it refused to work on one day. Contacted him – got hex file and info how to re-flash i Continue Reading →
