Ktag 7.020 Red PCB Backup, Restore, Read and Write: Select the proper Family, then: Click on Help for the see the connection instructions. Connect to the ECU following the connection instructions provided in the Operating Manual. Once back to the previous window, Click on OK to display the prog Continue Reading →
Good News!!! MPPS V18 software is compatible with the MPPS V21 hardware; MPPS V21 software is compatible with the MPPS V18 hardware; MPPS V21 software and MPPS V18 software can share the same hardware. Most importantly! the hardware WON’T BE LOCKED any more Anyway, there are a Continue Reading →
SD-cards provided with KESS and KTAG don’t meet the standards to be able to have a serial number (CID) identical between them. Indeed, for the KESS or KTAG to work, the contents of the SD-cards must be encrypted in relation to its CID. Speed is not the most important. But a SD card with a wr Continue Reading →
After tested, Carprog V10.93 full software works great with Carprog V8.21 interface and the cheaper version interface. The detail installation guide and software download link will be posted below. * Install Carprog full software V10.93 on the firmware V8.21 interface Producer: engineer T Continue Reading →
Hi to all, Technicians working for cardiagtool.co.uk today confirmed that Carprog software v10.93 v9.31 v8.21 all car able to read/verify EEPROM 93C46. Look here… Carprog 10.93 reads EEPROM 93C46: success! Carprog 9.31 reads EEPROM 93C46: success! Carprog 8.21 reads E Continue Reading →
Problem: The carprog v8.21full program prompt the warn massage “CRC32 Check failed” as below pic: Solution: Download the carprog.vws.zip from below link: https://mega.nz/#!Cpl1Aaoa!I0aQtrK_YD8toiv0ks1vuCzjo7OjuMYO9VgqFY-Vfus After downloading completely,extract the zip file and replace the o Continue Reading →
Updating Ktag firmware to 7.020 version doesn’t block processor. For correct operation device it is necessary to change CID SDcard on 035344535330344780399b1368010300 This procedure is supported by not each SDcard. Programs for change of CID and the description of process easy to find in Continue Reading →
Fgtech V54 0386 AES Software FIX for Win7-64bit – tested 100% (Quote) Fix driver for win7-64bit .. DRIVER CANNOT START CODE 10…AND FUNCTIONING TOGETHER BDM100 SOFTWARE AND DRIVER ON THE SAME PC WINDOWS 7-64Bbit AES Software Fix read 5% error https://mega.nz/#!DA0xGI Continue Reading →
Share an experience of how to connect MPPS V18 to PSG16 to read ECU for remapping. here you go here you go mate made by myself its really easy just find can wires in the loom near the battery they are green and white in black pvc ,good luck mate. I cut wires without cutting wires i didn’ Continue Reading →
