CGDI has released the latest FC200 V1.4.1.0 software update, bringing new ECU read/write support, locked ECU bench functions, Immo Off coverage, and several function optimizations. 1. Added Read/Write Support for the Following ECU Types: Borgward: MED17.8.21 Changan: MT92.1E Buick: GL8 48V (Lith Continue Reading →
Some users have reported that when using the CG FC200 to read Chery, Great Wall, BAIC, Geely, Changan, and other ME7.8.8 / ME7.9.7 / M7.8 ECUs, the operation may fail with an “E121 Version Not Supported” error, prompting you to use BOOT mode. If you encounter this issue, try the following tip w Continue Reading →
This article explains how to Boot Glitch Unlock a 2020.06+ encrypted Bosch MD1CS089 ECU using the CG FC200 ECU Programmer. For encrypted BMW B48/B58 MDG1 ECUs, CG FC200 can unlock the ECU directly in Bench Mode with the dedicated DB15 cable. For other encrypted ECUs, an additional Boot Glitch DME Continue Reading →
The latest software V1.3.5.4 for CG FC200 ECU Programmer is available now. This update focuses on increasing coverage for Audi, Ford, and Honda, alongside more robust DTC management. Check the upgrade details below and update your device promptly. FC200 V1.3.5.4 Update Info: 1.New ECU Re Continue Reading →
CGDI has released the new CG FC200 Update Version 1.3.2.4 on November 30, 2025, bringing enhanced ECU support and improved repair capabilities. This update adds CALID repair support for a wide range of ECUs, including Hyundai, Kia, Dodge, BAIC, Buick, BYD, Changan, Chevrolet, Chery, and Dongfeng Continue Reading →
CG FC200 ECU Programmer released the new software V1.2.5.1 and V1.2.5.2 last week. FC200 V1.2.5.1 Registered Version Update time: 2025.01.15 New Functions: 1. Added Wuling SIM2K-51.4 read/write, VIN modification, and three unready functions 2. Added Jinbei Lingdian TR40 read/write, V Continue Reading →
A 2012 Jeep Compass 2.2 diesel ECU with DCM 3.5. Actually it’s from Mercedes company 2.2 diesel, similar with CRD2. It’s 136 horsepower. It can’t be read via OBD or on bench, but it can be read/write with CG FC200 ECU Programmer in boot mode. Please follow the steps as below: Connect FC200 to Continue Reading →
How to use CG FC200 to read and write Volvo Denso MB279700xxx ECU? Check the tips and guide below. 1.Update your FC200 software to V1.1.7.0 or above FC200 V1.1.7.0 added Volvo Denso models MB279700-9500, MB279700-9801, and MB279700-9811 read and write function (platform) Free download Continue Reading →
CG FC200 ECU Programmer released the newest software V1.1.9.0 in March 2024. The BOSCH ST10 ECU and checksum function were added, as well as support for Denso ECU and other brand ECUs. A new button for “DTC off support list” was also added to the main interface, along with some bug f Continue Reading →
