Some users have reported that when using the CG FC200 to read Chery, Great Wall, BAIC, Geely, Changan, and other ME7.8.8 / ME7.9.7 / M7.8 ECUs, the operation may fail with an “E121 Version Not Supported” error, prompting you to use BOOT mode. If you encounter this issue, try the following tip w Continue Reading →
This article explains how to Boot Glitch Unlock a 2020.06+ encrypted Bosch MD1CS089 ECU using the CG FC200 ECU Programmer. For encrypted BMW B48/B58 MDG1 ECUs, CG FC200 can unlock the ECU directly in Bench Mode with the dedicated DB15 cable. For other encrypted ECUs, an additional Boot Glitch DME Continue Reading →
The latest software V1.3.5.4 for CG FC200 ECU Programmer is available now. This update focuses on increasing coverage for Audi, Ford, and Honda, alongside more robust DTC management. Check the upgrade details below and update your device promptly. FC200 V1.3.5.4 Update Info: 1.New ECU Re Continue Reading →
CG FC200 ECU Programmer released the new software V1.2.5.1 and V1.2.5.2 last week. FC200 V1.2.5.1 Registered Version Update time: 2025.01.15 New Functions: 1. Added Wuling SIM2K-51.4 read/write, VIN modification, and three unready functions 2. Added Jinbei Lingdian TR40 read/write, V Continue Reading →
A 2012 Jeep Compass 2.2 diesel ECU with DCM 3.5. Actually it’s from Mercedes company 2.2 diesel, similar with CRD2. It’s 136 horsepower. It can’t be read via OBD or on bench, but it can be read/write with CG FC200 ECU Programmer in boot mode. Please follow the steps as below: Connect FC200 to Continue Reading →
How to use CG FC200 to read and write Volvo Denso MB279700xxx ECU? Check the tips and guide below. 1.Update your FC200 software to V1.1.7.0 or above FC200 V1.1.7.0 added Volvo Denso models MB279700-9500, MB279700-9801, and MB279700-9811 read and write function (platform) Free download Continue Reading →
CG FC200 ECU Programmer released the newest software V1.1.9.0 in March 2024. The BOSCH ST10 ECU and checksum function were added, as well as support for Denso ECU and other brand ECUs. A new button for “DTC off support list” was also added to the main interface, along with some bug f Continue Reading →
A 2012 Jeep Compass 2.2 diesel ECU with DCM 3.5. Actually it’s from Mercedes company 2.2 diesel, similar with CRD2. It’s 136 horsepower. It can’t be read via OBD or on bench, but it can be read/write with V1.1.6.0 CG FC200 ECU Programmer in boot mode. Connect FC200 to a PC and run software Se Continue Reading →
CG FC200 ECU programmer can read and write Bosch EDC16/ ME9.0/ MED9.1/ MED9.5 ECUs on bench now. To perform this function, make sure your software is updated to V1.1.3.0, and need an extra MPC5XX-P02-M230102 Adapter to work with. Free download V1.1.3.0 CG FC200: https://mega.nz/folder/3CI Continue Reading →
