Foxflash Not Work with JTAG/BDM Cable Solution

Foxflash ECU Chip Tuning Tool can support JTAG/BDM mode for Denso ECUs reading and writing. Just need to open the ECU and connect it with the JTAG/BDM adapter. Sometimes, it cannot work normally. The possible cause is the ribbon cable is not correctly orientated. How to fix this problem if it appears?

 

Here is the solution:

Check the difference of JTAG/BDM cables below.

foxflash not work with jtagbdm cable solution 1

Remove the connector keyway to modify the cable

Then can plug the cable into foxflash ECU Programmer in correct orientation

foxflash not work with jtagbdm cable solution 2 foxflash not work with jtagbdm cable solution 3 foxflash not work with jtagbdm cable solution 4 foxflash not work with jtagbdm cable solution 5

 

The solution applies to the following ECUs supported by Foxflash:

BDM E JTAG MODES FOR:

BDM MPC 55x

BDM MPC 56x

BDM MC32 / ZC32

BDM HC12 / S12x

 

JTAG NEXUS MPC/SPC 56xx

 

JTAG NEXUS MPC 55xx

 

JTAG RENESAS

SH7055

SH7058

SH7059

SH7251

SH72543

SH72544

 

JTAG NEC 76F00xx

76F0038AGD

76F0038GD

76F0039AGD

76F0039GD

76F0040GD

76F0070

76F0085

 

DCM6.2A/C JTAG_BOOT

DCM6.2APJTAG_BOOT on the following ECU reference:

  • Hyundai
  • Audi
  • Citroen
  • Fiat
  • Kia
  • MAN
  • Peugeot
  • VW
  • Toyota
  • Ssangyong

 

Tech support:

Email: sales@eOBDTool.co.uk

WhatsApp: +86 159 7293 3706

Skype: Eobdtool.co.uk

Business Time: Monday – Friday, 8:30am – 6:00pm CST (UTC/ GMT+08:00)

 

UK Professional OBD2 Tools Online Shop

(Visited 266 times, 2 visits today)