First comes the free download link of Xprog M 5.5.5 flash files https://mega.nz/#!kcJzHKiI!oODgrezoNa22lTLVo4Fc3_5QL3FQQ0yzRqVDc5a_FV0 Guide: In xprog choose atmega64 >>> PROJECT >> FILES, and load FLASH, EEPROM and CONFIGURATION files >> Firts ERASE DEVICE… afte Continue Reading →
2018 Xprog M V5.84 firmware V4.4, with USB dongle, adds new authorizations: AUTH-0028-1 Renesas V850 Authorized and AUTH-0028-2 Renesas SuperH Authorized 2017/10/9. XPROG-M V5.84 Authorizations: AUTH-0001 Motorola HC05 family authorization (allows to read/write EEPROM) AUTH-0002 Continue Reading →
Xprog manual: how to read CEM units from Volvo S40/V50/C30/C70 2004- It’s Xprog working for Volvo S40/V50/C30/C70 2004- Xprog-box 5.7.0 Xprog-m 5.6.0 It is CEM unit used on S40/V50/C30/C70 2004- This CEM has already get clone in a company. open it up and saw 5 soldering spots to the left from Continue Reading →
This WinKFP job was done with ICOM A2 emulator for FRM3 flash after FRM3 repair/reflash by Xprog-m or other programmer the like. After FRM3 was repaired, then need to flash the correct software in FRM3 module. The flash can be done with WinKFP, and in 2 ways. Comfort mode and develop mode! The Continue Reading →
I’m often reading about Xprog, R260 and R270. Whats the deal about these tools? I tried so search and read about these tools but this confused me. Can someone explain me short and effective the difference and pros/cons about these tools? Maybe this could be a good sticky for new users. My g Continue Reading →