OBDSTAR DC706 ECU Tool with P003 Adapter Kit can read/write EEPROM/Flash, and read IMMO data on VW 7GV & 9GV ECMs on bench successfully. 1.OBDSTAR DC706 R/W VW 7GV ECM on BENCH 2.OBDSTAR DC706 R/W VW 9GV ECM on BENCH All devices and accessories required: OBDSTAR DC706 hos Continue Reading →
Some customers gave feedback that Foxflash Bench Box stopped working recently. The possible cause is the relay didn’t send 12v to ECU or the P channel mosfet burned. Check the corresponding solutions below. Case 1: The relay didn’t send 12v to ECU. The relay gives power. The blue bench b Continue Reading →
Customer problem: I want to use Foxflash ECU programmer to read and write MPC 55x/56x in BDM/Jtag mode. But when I run foxflash software, there is an error pops up “We remind you that your subscription is about to expire. Contact us to renew it…”. Eobdtool.co.uk engineer replied: It do Continue Reading →
Launch X431 ECU & TCU Programmer new tutorial: Work with X-PROG3 Adapter Cable 2 (VL381) to clone Audi AL381 gearbox TCU on PC software, easy and fast! (Launch X-Prog3 PC Adapter with X-Prog3 also can perform it.) Here is the detailed operation guide: Make sure the PC software is downl Continue Reading →
How to use Launch X431 X-Prog3 PC Adapter and X431 X-Prog3 to clone VW DQ200 Transmission Computer? Check the test on a VW Ameo 2016 DQ200 TC1766. Procedure: 1.Download and install X-Prog3 PC Adapter PC Software 2.Connect the X-PROG3 PC ADAPTOR to the computer using a cable, and then con Continue Reading →
Eobdtool.co.uk newly released original Launch X431 ECU Programmer Standalone version and X-Prog3 PC Adapter. Both are the PC version, work with PC software for ECU TCU reading, writing and cloning, no need X431 tablet. X431 ECU Programmer Standalone (Item No. SE175): Don’t need X-prog3 o Continue Reading →
Foxflash Bespoke ECU Programmer is a complete tool for reading and programming engine control unit via OBD and Boot mode and Jtag systems. Full system and Bench model also available. Fox Flash is a unique solution for mechatronics. TCU package for automatica transmissions available. Review Continue Reading →
Here are some Frequently Asked Questions about FoxFlash: Install on Win7 Win10 or Win11? The answer : you can work on Windows7 Windows10 Windows 11 but you need to use 64bits system . How to Unlock VAG Simos PCR2.1 ECU with Foxflash by OBD? Get Identity, and get an Ori, modify Ori and duri Continue Reading →
Godiag GT107+ DSG Plus can work with foxflash ECU programmer to read DQ200 and DQ250 TCU data. It needs to set GODIAG GT107 + analog ignition switch in “manual” mode. Godiag GT107+ DSG Plus and foxflash Read DQ200: Accessories required: Godiag GT107+ DSG Plus Gearbox Data Adapter Godia Continue Reading →
