Use the Launch X-PROG3 PC Adaptor and X431 X-Prog3 to clone Buick E83 engine computer on bench, works like a charm! Connection diagram: Device connection: Full connection: Run X-PROG3 PC Adaptor PC Software Note: For the first time using, need to activate device with serial number and Continue Reading →
OBDSTAR DC706 ECU Tool with the newest TCM software V30.14 can support 15 VW ECU models on bench. SIEMENS/CONTINENTAL NG TRANSFER CASE TCM is newly added. DC706 read and write EEPROM & flash data for it perfectly. OBDSTAR DC706 VW TCM Support List (Newest): Brand ECU Brand Type Dum Continue Reading →
Volvo DELPHI 2015- R5F64525 CEM can be cloned with OBDSTAR DC706 in bench mode. Only 2 minutes! Preparation: Volvo DELPHI 2015- R5F64525 CEM OBDSTAR P004 ECU Clone Jumper OBDSTAR P004 Adapter 12V2A charger OBDSTAR main cable (OBD cable) OBDSTAR DC706 ECU Tool How to do: 1.Connect the 12V Continue Reading →
Confirmed! BMW MSV90 TC1796 engine computer can be cloned with Launch X431 ECU & TCU Programmer successfully, no need X431 tablet and X431 X-Prog3 programmer. Main steps: Step 1: Read EEPROM and Flash data of original engine computer Step 2: Read EEPROM and Flash data of new engine com Continue Reading →
GODIAG ECU GPT Boot AD is compatible with ECU programmer such as Foxflash, PCMTuner, Tactrix Openport 2.0, SM2 Pro, etc and GODIAG GT100/ GT100+ to read and write data using the OBD2 Bench or GTP Bench method (without disassembling ECU) or Boot method (with disassembling ECU). Here we will use SM Continue Reading →
Foxflash bench box works with OBD and direct connect bench. If the bench box doesn’t have a connection, how to do a self-test? Here is the simple operation guide. 1.Connect Foxflash tool and a computer via the USB cable Connect the Bench Box to foxflash ECU programmer and power it through Continue Reading →
GODIAG GT100+ OBDII Breakout Box works well with Autel MK808Z-BT diagnostic scanner to diagnose ECUs on bench no issues. It can check whether the diagnostic tool can send communication signals, tell if the car/ECU module, and cable communication is good or not, directly display the Voltage and Cu Continue Reading →
How to use Autel MK808Z-BT to diagnose Audi/VW Simos 6.3/ Simos 18.3 ECU with Godiag GT100+ OBDII Breakout Box on bench? It’s easy and safe to operate. Check the detailed guide below. Autel MK808Z-BT with Godiag GT100+ Diagnose Audi Simos 6.3: 1.Device connection Remove the MaxiVCI Mini fr Continue Reading →
Great news!!! Customers who buy foxflash ECU Chip Tuning Tool can modify files for free by factory. Purchasing time: between October 16 and October 31, 2023 Requirement: Activate the device first after receiving it. Modify file validity: within 15 days after activating the device Do any files Continue Reading →
