KT200 ECU Programmer Common problems and solutions

KT200/KTM200 ECU Programmer software Common problems and solutions

1.The software cannot connect to the server

KT200 software cannot connect to the server 1

KT200 software cannot connect to the server 2

After the normal connection, click “CONNECT”, the “WAIT INTERNET CONNECTION” buffer will pop up, and it has not been connected, and finally the page will pop up:

KT200 software cannot connect to the server 3

Solution:

  • Take the computer WIN10 system as an example, open the windows settings:

KT200 software cannot connect to the server solution 1

  • Search and open “Virus and Threat Protection”, check whether anti-virus protection software is installed, and close and delete the anti-virus software if so.
  • In windows settings, search for “firewall and network protection” settings and turn off network firewall.

KT200 software cannot connect to the server solution 2

  • And check if Windows Defender Firewall is turned off synchronously

KT200 software cannot connect to the server solution 3

  • After checking, make sure to close the firewall and anti-virus system software, reopen KT200, and connect to the server

KT200 software cannot connect to the server solution 4

KT200 software cannot connect to the server solution 5

  • Finally show successful connection to the server

2.Diagnose detect problems and solution

  • In the KT200-master folder, the suffix dll files cannot exceed three, and the extra ones can be deleted.
  • There are three files Gcheck.dll, SecurityAccess.dll, wuzi.dll in the folder

KT200 software three files

3.Time zone problem

  • If the time zone is inconsistent with the location, this error will be prompted

KT200 software time zone problem

Solution: In the computer settings, search for “time”, select the corresponding time zone, and synchronize the network time

KT200 software time zone problem solution

 

4.Driver problem can’t open

The driver is missing, prompt

KT200 software driver problem

Solution:

  • Install the patch package corresponding to the system, and it can run normally

KT200 software driver problem solution

  • The 32-bit system corresponds to the X86 version, and the 64-bit system corresponds to the X64 version, just install it

5.dfb2xx.dll file error

  • Use Diagnose to detect, pop up

KT200 software dll file error

Solution:

  • This is because the size of the dfb2xx.dll file in C:\windows\syswow64 is inconsistent. The size of the dfb2xx.dll file of KT200 is 202kb, not 392kb, so replace it

KT200 software dll file 1KT200 software dll file 2

6.KT200 driver error solution

  • When opening the software, it prompts that the driver is wrong
  • Open the computer settings, search for “recovery”, select “reset this computer”

KT200 software driver error solution 1

  • Then select “Troubleshoot”

KT200 software driver error solution 2

  • Then select “Advanced Options”

KT200 software driver error solution 3

  • Then select “Startup Settings”

KT200 software driver error solution 4

  • Select “Restart”

KT200 software driver error solution 5

  • Finally, just select “Disable automatic driver signing”

KT200 Auto Version:https://www.eobdtool.co.uk/wholesale/ktm200-ecu-chip-tuning-tool.html

KT200 Full Version:https://www.eobdtool.co.uk/wholesale/ktm200-ecu-programmer.html

(Visited 63 times, 1 visits today)