MPPS V21 V18 read/write ECUs via BOOT
MPPS cables with v18 or v21 software read/write ECUs through the BOOT mode
MPPS V18 china clone read/write ECUs via BOOT:
Golf 1.6 TDI Siemens Simos Pcr2.1
R/W can (unlock boot mode-ok) – ok
Golf TDI EDC17c14
read / write all ok,
ECU EDC17 on Audi a6 2009
this tool read via boot
Polo SIMOS 3PE 1.2 12v
read/write as generic simens SIM4LE boot mode flash 512kB – OK (catalyst off).
read normally, Not so OBD, just flash
China clone: EDC17C10 PSA
Read OK 3:30min – faster than Ktag, Kess and FGtech.
Corsa D 1.3 CDTI, EDC17C18, 70.0kw,2010, Z13DTE
R/W bootmode TriCore™ = OK
Fiat Doblo 1.3 mjet mjd6f3 obd – r/w ok
Range Rover edc17cp11 boot – r/w ok
this tool looks great
MPPS V21 clone read/write ECUs via BOOT:
Read written FLESH + MPC + EEPROM fiat marely 6f3, OK through OBD.
There are few tools that read-write EEPROM marely by OBD.
OBD-flash reading 3min 20 sec., 45 sec-writing.
MPC and EEPROM read OBD-20 seconds, 20 seconds writing (multyboot OBD) .A very strong and stable tool.
its always a risk with edc17 , this ecu opens easy , boot is safer , if you trust your tool you have to make a choice
Ems3132 Bootmode. Read ok. Write not ok.
Jetta 2,0 16v TSi 200cv – MED17.5.2 Tprot10
Read in Boot = OK
made OBD unlock and CKS by MPPS, write boot = OK
Magneti Marelli 6f3, 6JF, 8F2, 8F3 in obd and multiboot with micro and eeprom works very well!
(thanks to all contributors)