2018 Kess V2 firmware 5.028 is coming soon, let’t get to know about it. Kess V2 5.028 Adds 53 New Protocols + Updated 257 Protocols 257 updated protocols Protocol version 53 new protocols Protocol name FW 5.017 FW 5.028 APRILIA / PIAGGIO MARELLI 5DM KLINE 2.003 2.003 APRILIA Continue Reading →
PCR2.1 Read/Write with Ktag: Tricore BOOT Simos PCR2.1 adapter Move the retainer carefully, towards the ECU and ensure that all pins are in their designed position To read EEPROM and unlock ECI, switch the adapter in BOOT mode Turn ECU power off before switching the mode Disconnect power fro Continue Reading →
I rebuilt and generated a SD card image for the RED Kess V2 5.017. This image can fit in small SD cards. This image is generated specially for the RED Kess CID number. So you must write it in the original SD card with good CID number. (Some Green Kess have same CID) It’s preferable to repla Continue Reading →
Hi all and thanks all for your responses. Here, i collect working solutions of Ktag or Kess V2 NO 12V. Hope it helps someone out. Part 1: Cannot get 12v of output from Kess V2 I use a AC power to connect to my kess V2 adapter. The seller gave it. it it 12v and 1A. When I use my kess I̵ Continue Reading →
MPPS V21 come to life in the end of the 2017 year!! Tested on many ECUs for one month. The interface is NEVER locked! MPPS V21 released notes: MPPS V21 OBD: Volvo ME7 CAN R/W/Cks Bench only at the moment. Volvo EDC15C11 CAN R/W/Cks Bench only at the moment. Bentley ME7.1.1 CAN R/W/Cks Mast Continue Reading →
Confirmed: Mk6 PCR 2.1 can be read using kess V2 Tip from others. help me a lot You can use chinese clone not reworked unit : fgtech v54 , ktag 6.070 , kess v2 4.0.36 But k suite is preferred to work on this ecu (kess or ktag) , ksuite seem to be more stable than fgtech on pcr but work too. Yo Continue Reading →
Verified: VVDI Prog can’t read Mercedes-Benz W210 EIS 68HC05. That is because W210 eis 68hc05 inside. 2 piece. and Vvdi prog does not know about 68hc05. Only hc908 and hc912 it has been ignored due to the fact that many other early programmers can do, such as Xprog-m or Orange5 or ETL, Continue Reading →
Kess V2 5.017 New Version is better than the old version, the detail comparison please check the following: The differences between the Kess V2 5.017 red boards. Kess V2 5.017 Version 1: Most of the boards look like this Kess V2 5.017 Version 2: board with different reworked p Continue Reading →
Carprog full v10.05 displays the error “Can’t connect to remote server” when read & write i20 ECU and click on “find crash”. Generally speaking, cheap Carprog clone cannot do a lot. It’s reasonable. Carprog full clone does good in airbag reset only. If carprog ask you to connect r Continue Reading →
