(Fixed) Audi A4 1.8T 2007 car not start after reading with Galletto V54

This post starts with the problem with Audi A4 1.8T 2007 that the car not start after reading with FGtech Galletto V54, how to fix it? Go on reading following parts.

Car model and year:

Audi A4 1.8T 2007 163hp

8E0909518AQ_0261208524_1037372505

ECU programmer to use:

Galletto v54 that I bought from here:

http://www.eobdtool.co.uk/wholesale/fgtech-galletto-4-master-ecu-programmer.html

fgtech-galletto-4-master-connection

Problem Description:

I have a big problem with Audi A4 1.8T 2007 163hp

8E0909518AQ_0261208524_1037372505

I read this with Galletto v54 with OBD…

1.8 Turbo 150/180CV ME7.5.1 29f400BB..galletto say change driver

1.8/2.0 Turbo 150/180CV ME7.5.5 29f800BB….read success…100% Ignition off…

After a small talk with customer when will write the remap….he wants to drive off…car not start

VCDS go ECU an read fault code say “programming process not finished”

I have just read, not write…

The file is not corrupt—look Attachment, easy the original write OBD???

https://mega.nz/#!ZYZnWbAI!d2kYHLCDsf9kFZ-KssnG4ys3ggVURlOIV0Qcrn4v2HY

Solution:

Update…the car is running

-> I remove fuses from Dash and Radio\Navi

-> use a good bosch power supply (14V)

-> Delete all fault code VCDS

-> Write the same file was read before with FGtech V54

-> Note all prompts from galletto about ignition on/off

-> Car start….running

-> Delete all fault code VCDS

This is from www.ecu-programmer.com website Fgtech Galletto technical support: (Fixed) Audi A4 1.8T 2007 car not start after reading with Galletto V54