OBDSTAR DC706 Clone VW SIMOS18.10 & SIMOS10.22 ECMs by Boot Guide

It has been tested and confirmed by OBDSTAR Tech that OBDSTAR DC706 ECU Tool has the ability to read and write VW SIMOS18.10 & SIMOS10.22 ECMs in Boot mode. It’s simple and fast to operate with the wiring diagram and instruction in the device system. Only need 2-3 minutes!

 

1.OBDSTAR DC706 Clone VW SIMOS18.10 ECM

Tips:

Update ECM software to V30.54 or above

Connect DC706 with an available WiFi

 

Accessories needed:

obdstar dc706 clone vw simos18.10 ecm 1

Operation:

Select ECU Flasher>> All>> ECM>> ECMV30.54>> imos18.10>> VOLKSWAGEN CONTINENTAL SIMOS18.10 TC1791

obdstar dc706 clone vw simos18.10 ecm 2

Check Boot and PINOUT connection diagrams

obdstar dc706 clone vw simos18.10 ecm 3

Follow the diagrams to connect DC706 ECU Tool and ECU correctly using the related accessories, and supply power to DC706 as well

After connection, click “Start”, select “BOOT” and “MP001” options

obdstar dc706 clone vw simos18.10 ecm 4

Make sure MP001 Programmer with DC706 ECU tool connection is normal

Connect ECU- OK

Back up the original INT flash and INT eeprom (TC1791) data- OK

Back up the INT flash and INT eeprom (TC1791) data of new SIMOS18.10 ECM- OK

Write the original ECM data into the new one- OK

Disconnect

obdstar dc706 clone vw simos18.10 ecm 5

obdstar dc706 clone vw simos18.10 ecm 6 obdstar dc706 clone vw simos18.10 ecm 7

2.OBDSTAR DC706 Clone VW SIMOS10.22 ECM

Tips:

Update ECM software to V30.60

Connect DC706 with an available WiFi

 

Accessories required:

obdstar dc706 clone vw simos10.22 ecm 1

Operation:

Select ECU Flasher>> All>> ECM>> ECM V30.60>> imos10.22>> VOLKSWAGEN CONTINENTAL SIMOS10.22 (BETA) TC1767

obdstar dc706 clone vw simos10.22 ecm 2

Check Boot and PINOUT connection diagrams

obdstar dc706 clone vw simos10.22 ecm 4

Follow the diagrams to DC706, the related accessories and ECU correctly, and supply power to MP001 Programmer

obdstar dc706 clone vw simos10.22 ecm 4

After connection, click “Start”, select “BOOT” and “MP001” options

obdstar dc706 clone vw simos10.22 ecm 5

Connect ECU- OK

Back up the original INT flash and INT eeprom (TC1767) data- OK

Back up the INT flash and INT eeprom (TC1767) data of new SIMOS10.22 ECM- OK

Write the original ECM data into the new one- OK

Disconnect

obdstar dc706 clone vw simos10.22 ecm 6 obdstar dc706 clone vw simos10.22 ecm 7 obdstar dc706 clone vw simos10.22 ecm 8

For more supported ECU models info, check OBDSTAR DC706 COVERAGE LIST

UK Professional OBD2 Tools Online Shop

(Visited 6 times, 1 visits today)