OBDSTAR DC706 ECU Tool is able to read and write INT flash & EXT EEPROM, and reset virgin on the Mercedes-Benz DELPHI CRD3P.D1 TC1793+25LC256 ECM in Bench mode. Requirement: Benz ECM OBDSTAR DC706 with ECM V31.00 (or above) OBDSTAR P004 Adapter and ECU Clone Jumper 12V 5A Power Sup Continue Reading →
OBDSTAR DC706 ECU Tool is able to read and write INT flash & EXT EEPROM, and reset virgin on the Mercedes-Benz DELPHI CRD3P.D1 TC1793+25LC256 ECM in Bench mode. Requirement: Benz ECM OBDSTAR DC706 with ECM V31.00 (or above) OBDSTAR P004 Adapter and ECU Clone Jumper 12V 5A Power Sup Continue Reading →
OBDSTAR DC706 ECU Tool added Mercedes-Benz Siemens/Continental VGS2-NAG2 and Benz Siemens/Continental VGS3-NAG2 data erase function in the TCM V30.37. It’s simple and fast to perform a data wipe on the Benz Siemens VGS2-NAG2/VGS3-NAG2 transmission to erase the existing coding data and immobili Continue Reading →
OBDSTAR DC706 with ECM V30.96 can read and write Volkswagen SIEMENS SIMOS 3.3A 29F400BB+93C76 ECM EXT EEPROM (95320) EXT EEPROM and Flash data, Pincode and IMMO OFF in Bench mode perfectly. OBDSTAR P004 Adapter & ECU Clone Jumper, main cable and 12V power supply are required to perform this f Continue Reading →
Question: I’m gonna read and write Hyundai KEFICO CPEGD2.20.3 TC1782 ECM, which OBDSTAR Tool can I use? Eobdtool.co.uk gave the suggestion below: Both OBDSTAR DC706 ECU Tool and X300 Classic G3 added this car model in the ECM V30.80. They can read and write Hyundai KEFICO CPEGD2.20.3 TC1 Continue Reading →
OBDSTAR DC706 with ECM V30.70 can read and write Volkswagen 7GV ECM EXT EEPROM (95320), read IMMO data and do IMMO OFF in Bench mode successfully. OBDSTAR P004 Adapter & ECU Clone Jumper, main cable and 12V power supply are required for this function. Operation guide: Select ECU Flasher>& Continue Reading →
Sometimes, Mercedes-Benz A-Class, B-Class, and GLA-Class vehicles may experience a situation where the car can be started but cannot be put into gears. This is caused by a loss of transmission ECU data due to a discharged car battery. The fault codes read with a diagnostic tool will reveal DTC P0 Continue Reading →
OBDSTAR DC706 with ECM V30.61 (newest) can read and write Flash and EEPROM data for Smart EDC16C32, EDG15C-5.X KLINE, ME17.9.20 and ME7.7.0 KLINE ECMs on Bench. Some support Boot and OBD modes as well. Check the support list below carefully. BRAND ECU BRAND TYPE DUMP R & W INT flash R &a Continue Reading →
It has been tested and confirmed by OBDSTAR Tech that OBDSTAR DC706 ECU Tool has the ability to read and write VW SIMOS18.10 & SIMOS10.22 ECMs in Boot mode. It’s simple and fast to operate with the wiring diagram and instruction in the device system. Only need 2-3 minutes! 1.OBD Continue Reading →
