A 2012 Jeep Compass 2.2 diesel ECU with DCM 3.5. Actually it’s from Mercedes company 2.2 diesel, similar with CRD2. It’s 136 horsepower. It can’t be read via OBD or on bench, but it can be read/write with V1.1.6.0 CG FC200 ECU Programmer in boot mode. Connect FC200 to a PC and run software Se Continue Reading →
How to read Ford/JLR SID208 ECU easily? It’s good to use GODIAG ECU GPT Boot Adapter, SM2 Pro J2534 device, Godiag GT100+ OBDII Breakout Box, and PCMTuner Dongle with pcmflash software together. The main function of Godiag GT100+ here is to check communication. Step 1: Read Password (via Continue Reading →
Use the Launch X-PROG3 PC Adaptor and X431 X-Prog3 to clone Buick E83 engine computer on bench, works like a charm! Connection diagram: Device connection: Full connection: Run X-PROG3 PC Adaptor PC Software Note: For the first time using, need to activate device with serial number and Continue Reading →
OBDSTAR DC706 ECU Tool with the newest TCM software V30.14 can support 15 VW ECU models on bench. SIEMENS/CONTINENTAL NG TRANSFER CASE TCM is newly added. DC706 read and write EEPROM & flash data for it perfectly. OBDSTAR DC706 VW TCM Support List (Newest): Brand ECU Brand Type Dum Continue Reading →
Volvo DELPHI 2015- R5F64525 CEM can be cloned with OBDSTAR DC706 in bench mode. Only 2 minutes! Preparation: Volvo DELPHI 2015- R5F64525 CEM OBDSTAR P004 ECU Clone Jumper OBDSTAR P004 Adapter 12V2A charger OBDSTAR main cable (OBD cable) OBDSTAR DC706 ECU Tool How to do: 1.Connect the 12V Continue Reading →
Confirmed! BMW MSV90 TC1796 engine computer can be cloned with Launch X431 ECU & TCU Programmer successfully, no need X431 tablet and X431 X-Prog3 programmer. Main steps: Step 1: Read EEPROM and Flash data of original engine computer Step 2: Read EEPROM and Flash data of new engine com Continue Reading →
GODIAG ECU GPT Boot AD is compatible with ECU programmer such as Foxflash, PCMTuner, Tactrix Openport 2.0, SM2 Pro, etc and GODIAG GT100/ GT100+ to read and write data using the OBD2 Bench or GTP Bench method (without disassembling ECU) or Boot method (with disassembling ECU). Here we will use SM Continue Reading →
Foxflash bench box works with OBD and direct connect bench. If the bench box doesn’t have a connection, how to do a self-test? Here is the simple operation guide. 1.Connect Foxflash tool and a computer via the USB cable Connect the Bench Box to foxflash ECU programmer and power it through Continue Reading →
GODIAG GT100+ OBDII Breakout Box works well with Autel MK808Z-BT diagnostic scanner to diagnose ECUs on bench no issues. It can check whether the diagnostic tool can send communication signals, tell if the car/ECU module, and cable communication is good or not, directly display the Voltage and Cu Continue Reading →
