From sally: KESS V2 is a ECU programming tool that is perfect for OBD use, while KTag is perfect for Jtag, BDM and all the Boot application (tricore and ST10). With KESS V2 you programming directly through the OBD port of the vehicle, while with Ktag (Ktag 2.13) you need to take apart the ECU and Continue Reading →
Recently, KESS V2 software KSuite V2.15 has been released. Here, we obdtool offer software KSUITE 2.15 free download and installation guide. Hope it helps. Free download KESS V2.15 V2 (software and video guide included): http://www.chinaautodiag.com/download/ksuite-2.15.zip Compatible device: KES Continue Reading →
K-tag Ksuite v2.13 firmware 6.070 clone ECU tuning kit master version “mandatory update” error solution is provided. Problem: Ktag 6.070 works good in the past days, but it suddenly required to mandatory update software today. But the K-TAG ksuite clone would never allow to be updated online. Continue Reading →
Note: Carry this out at your own risk !! The method has been tested on Peugeot 406 and 607 without any issues, no smoke, no turbo back pressure ! Worried about having to pay huge repair bills? How about disabling/removing the system all together safely? Well you answer is below. Let’s go STEP 1. Continue Reading →
Not sure if this was covered but I got the idea from someone in the carsoft success thread. He said he had to connect the L line(pin 15) from the 20 pin connector to the K line(pin 17) going into the carsoft module. Some people were confused so i hope this helps. I have a generic eobdtool.co.uk Continue Reading →
Xhorse VVDI2 Commander VAG, Porsche and BMW programmer software is newly released to V1.0.8. Free download VVDI2 V1.0.8 software VVDI 2 V1.0.8 update feature: ===== VAG V1.0.8 ===== 1. Fix bug for key learn in touareg(KWP2000), bentley(KWP2000) 2. Add support for BFM remote Continue Reading →
This article is strictly for people having problems connecting to car or BMW carsoft software, or computer problems related to it. if you want to ask or tell what BMW Carsoft 6.5 can do, or how to get it to do something please use this article: DIY – Carsoft – BMW Diagnostic Software Continue Reading →
Here is the instruction on reading BMW EDC17 ECU with KESS V2 V2.15 firmware 4.036 ECU tuning kit master version. Select vehicle manufacturer BMW Select model: 7 series F01 Select 740D 3000 D diesel and ECU type BOSCH EDC17 Press OK to view instructions Select the plug-in you need: BOSCH EDC Continue Reading →
Carprog Full has recently launched the newest V7.28 (with all software activated and all 21items Adapters). So, there come with a question — How to update your Carprog Full to the newest V7.28. Update Tips: Please make an order of V7.28 Carprog software on obd tool. Our after-sale service wil Continue Reading →
