How to test KT200 BENCH BOX yourself? Check the step-by-step guide below. Connect KT200 ECU programmer, Bench Box and computer Open KT200 software (V22.08.20) Click ‘Select Driver’ Then select BENCH MODE>> TOOLS BENCH MODE>> Test for BENCH BOXES>> TEST BENCH BOX V2 Cli Continue Reading →
KT200/KTM200 ECU Programmer software Common problems and solutions 1.The software cannot connect to the server After the normal connection, click “CONNECT”, the “WAIT INTERNET CONNECTION” buffer will pop up, and it has not been connected, and finally the page will pop up Continue Reading →
Topic: Which device can read and write BMW MSV90? Eobdtool.co.uk engineer’s suggestion: KT200, CGDI BMW, FC200/AT200, Yanhua ACDP with module 27 1.KT200/KTM200 (in boot mode): KT200 ECU List Read and write MSV90 DME in KT200 software: Open KT200 software Click on Manual to s Continue Reading →
Eobdtool.co.uk engineer tested and confirmed that VW MPC555/6-VAG EDC16U1 EEPROM can be read and written by KT200/KTM200 ECU programmer in Bench mode without any issue. This is VW MPC555/6-VAG Bosch EDC16U1 ECU module. Before the operation, connect KT200 ECU programmer to VW ECU and compu Continue Reading →
Yanhua ACDP Module 28 is specially designed for Jaguar, Land Rover, Chrysler, Dodge, Fiat, Honda, Jeep and other models of the ZF-9HP gearbox clone in BOOT mode. Compared to the traditional cable connection, it’s simpler, safer, more efficient and reliable. Mini ACDP Module 28 highlights: Continue Reading →
Some guys encounter this problem:After getting ecu bench tool and installing the application, registration is complete. I had try it right away on edc16u34 and it won’t read ID. always says S1 and S2 pinout error. Solution: Make sure the driver has been installed and the wiring connection Continue Reading →
Here eobdtool.co.uk shares a new solution to fix Fetrotech Tool software task bar disappearing problem (Task bar killed, tried admin, no antivirus. Task bar disappears after the splash screen!), no need to reinstall the operating system, simpler to resolve the error. The solution is offered by Ma Continue Reading →
KT200/KTM200 ECU Programmer supports OBD/BOOT/BDM/JTAG and multiple protocols for Bosch, Magneti Marelli, Continental, Denso, Delco, Temic or Siemens covering up to 5400 ECU, over 500 TCU, i.e Volvo MPS6, VAG DQ400e/SQ100, Jeep 9H28 TCUs. With the ECUHelp 3.0 software, customers also can get free Continue Reading →
Fetrotech Tool Software can be installed on Win7, Win8, Win10 and Win11, it depends on your own test. If you can open Fetrotech Tool software, but it flashes back and the taskbar disappears, you can download the backup system (about 12GB) provided by the factory and restore the system, or replace Continue Reading →