eobdtool.co.uk engineer makes a test on a new VW Simos 18.1 ECU and confirms that Vident iSmart800 Pro/ Foxflash ECU Chip Tuning Tool works well with Godiag GT105 plus GT107 to diagnose and read this ECU separately. What role does Godiag GT105 and GT107 play in the test? Help you to clear Continue Reading →
Sometimes, when you read the original ECU data and write into the new ECU, it may appear the issues such as the car cannot start normally, etc. Foxflash and New KT200 ECU programmer support the ECU clone function with the on-screen instruction in their own software, making the job easier. Both tw Continue Reading →
Foxflash ECU programmer has been confirmed can successfully unlock VAG Simos/Siemens PCR2.1 without opening the ECU. Safe read/write/unlock on bench is the most proven way, OBD depends on VR being available. That’s ideal saves having to solder the resistors on the board!! Here is some suc Continue Reading →
FoxFlash ECU Chip Tuning Tool released a series updates in January 2023. It adds BMW MSV90 protocols BOOT mode, more Delphi DCM6.2AP/A/C/V OBD, JTAG_BOOT read/write, Bentley Skoda (BOSCH) BENCH /BOOT/OBD, Toyota Denso Gen1 (76F00xx) OBD read/write, AUDI VW Group TCU DQ250C/E/F OBD virtual read/wr Continue Reading →
One customer shared his experience about Ktag ECU programmer. He used Ktag to read and write Micro, Flash and eeprom on Mercedes Benz M112 engine ECU successfully. Here is his operation process. Connect the Ktag and Benz M112 engine according to the pinout in the ktag software V2.23 Pin 5/ Continue Reading →
Which Audi TCM can be cloned with OBDSTAR DC706 ECU programmer on bench? Currently, DC706 with TCM V30.01 can read and write EEPROM &Flash on Audi TEMIC DQ200, DQ250, DL501, VL381, DL382 and DQ400E. Some TCMs also can recalibrate mileage. Check the details below. Brand ECU Brand Typ Continue Reading →
Is it possible to clone BMW TCM with OBDSTAR DC706? Yes. BMW ZF 6HP19/6HP21/6HP26/6HP28 and GETRAG DKG 436 Gen 1 TC1766 TCM are supported by DC706 with TCM V30.01 on bench. The OBDSTAR P003 Kit is required for ZF 6HP TCM. It has been tested and confirmed that DC706 can successfull Continue Reading →
Here shares the user guide of New KT200 ECU programmer. Main contents: Where to download New KT200 software? How to install New KT200 software? How to register New KT200 account? How to activate New KT200? How to install New KT200 driver? New KT200 overview: New KT200 ECU Programme Continue Reading →
Customer problem: I want to change the language of my CG FC200 to Polish, but I get the prompt “The device is not licensed for this language, please contact the developer.” Does it mean Polish is not supported? How to do? For this problem, the engineer of eobdtool.co.uk gives the solution belo Continue Reading →
