GODIAG ECU GPT Boot AD is compatible with ECU programmer such as Foxflash, PCMTuner, Tactrix Openport 2.0, SM2 Pro, etc and GODIAG GT100/ GT100+ to read and write data using the OBD2 Bench or GTP Bench method (without disassembling ECU) or Boot method (with disassembling ECU). Here we will use SM Continue Reading →
Foxflash bench box works with OBD and direct connect bench. If the bench box doesn’t have a connection, how to do a self-test? Here is the simple operation guide. 1.Connect Foxflash tool and a computer via the USB cable Connect the Bench Box to foxflash ECU programmer and power it through Continue Reading →
GODIAG GT100+ OBDII Breakout Box works well with Autel MK808Z-BT diagnostic scanner to diagnose ECUs on bench no issues. It can check whether the diagnostic tool can send communication signals, tell if the car/ECU module, and cable communication is good or not, directly display the Voltage and Cu Continue Reading →
How to use Autel MK808Z-BT to diagnose Audi/VW Simos 6.3/ Simos 18.3 ECU with Godiag GT100+ OBDII Breakout Box on bench? It’s easy and safe to operate. Check the detailed guide below. Autel MK808Z-BT with Godiag GT100+ Diagnose Audi Simos 6.3: 1.Device connection Remove the MaxiVCI Mini fr Continue Reading →
Great news!!! Customers who buy foxflash ECU Chip Tuning Tool can modify files for free by factory. Purchasing time: between October 16 and October 31, 2023 Requirement: Activate the device first after receiving it. Modify file validity: within 15 days after activating the device Do any files Continue Reading →
Is it possible to read/write Citroen C4 Spacetourer MD1CS003 ECU with Foxflash ECU Programmer via OBD? Here is the clue: 1.Before 2020 Bosch MD1CS003 BENCH! Try bench it, if locked, then no tool can do in the worldwide till now. 2.On the bench it works for sure. 3.Bench. Tested and is OK. 4.2021 Continue Reading →
Here come three new test reports about Autel MK808Z-BT diagnostic scanner. It works well with GODIAG GT100+ OBDII Breakout Box to diagnose ISUZU/ Mazda/ SIM2K ECUs on bench. Why use Godiag GT100+? It can be connected with any diagnostic tool to tell whether the car/ECU module, and cable c Continue Reading →
OBDSTAR DC706 ECU Tool with the newest software ECM V30.23 can clone Bosch ME17 and ME17.8.8 ECMs on bench perfectly. Something important to know: OBDSTAR P003 Kit is required to work together. Keep DC706 charging and communicating during the process, and make sure the internet connection is n Continue Reading →
Is it possible to clone Fiat BSI FCA DELPHI 70F3632/70F3633 by OBDSTAR DC706 on Bench? YES! OBDSTAR DC706 is replacing the IOTerminal, because it has many more functions such as ECM / TCM / BODY ECU cloning, and updates are continuous. In addition, it can be used without using a PC, with a Continue Reading →
