Audi Med9.1 EEPROM Read by KT200/KTM200 on Bench

KT200 ECU programmer read Audi Med9.1 EEPROM via bench mode approx. 3 Min, no issues!

Preparation:

KT200/KTM200 ECU programmer Full Version

(incl. KT200 main unit, Bench box, network cable, pinout line)

Audi Med9.1 ECU

Computer

 

KT200 BOSCH MED9.1 (MPC561/2)- Audi Pinout

(Also applies to VW/Seat/Skoda Gasoline)

kt200 read audi med9.1 eeprom on bench 1

 

Connection:

Connect KT200 master to Bench box and computer via network cable

Connect Bench box to Audi Med9.1 ECU with PINOUT line according to the wiring diagram

Also connect to 12V power supply

kt200 read audi med9.1 eeprom on bench 2

 

Must connect to network before operation (make sure the internet is normal)

 

Run KT200 software (KT200- 22.804)

Select Driver>> BENCH MODE>> VOLKSWAGEN>> MPC561/2-VAG>> MED9.1

Click INFO can check the corresponding wiring diagram

Click OK to enter data reading interface

kt200 read audi med9.1 eeprom on bench 3

Click CONNECT to identify the ECU info

Keep ECU Power On

After ECU data has been read out

kt200 read audi med9.1 eeprom on bench 4

Go to read EEPROM

Save the data with a new file (med9.1)

kt200 read audi med9.1 eeprom on bench 5

Keep ECU Power On

Read EEPROM data successfully

Turn off the dashboard (press the button on KT200 PINOUT line to OFF)

kt200 read audi med9.1 eeprom on bench 6 kt200 read audi med9.1 eeprom on bench 7

Done!

UK Professional OBD2 Tools Online Shop

(Visited 40 times, 1 visits today)