Foxflash ECU Chip Tuning Tool can support JTAG/BDM mode for Denso ECUs reading and writing. Just need to open the ECU and connect it with the JTAG/BDM adapter. Sometimes, it cannot work normally. The possible cause is the ribbon cable is not correctly orientated. How to fix this problem if it app Continue Reading →
The Foxflash ECU Programmer can support FCA GPEC2 GPEC3 GPEC4LM GPEC2A ECUs read and write in Boot mode since March 14, 2023.Click here to check the detailed ECU models. Today we’ll share the Pinout to these ECUs. BAM SPC5674 CONTINENTAL GPEC2A FCA Pinout Connect with the multifunction Continue Reading →
Is it possible to use Foxflash ECU Programmer to read and write Renault sid310? via OBD, bench or boot? Here is the answer. OBD and Boot mode both are OK. 1.OBD Driver for Renault Master SID310 is available in foxflash software. 2.Renault sid310 with foxflash by Tools Boot mode Fin Continue Reading →
Here are three new problems and solutions for Foxflash ECU Programmer. Problems: Problem 1: Value of 25/9/2022 is not valid for “Value” Problem 2: The application was unable to start correctly Problem 3: An error occurred while trying to download file The solutions offered by e Continue Reading →
Some customers ask how to use Foxflash ECU programmer to clone Benz VGS3, Audi MED9.1, and VW MED17.1 successfully. Here are tips offered by eobdtool.co.uk engineer. 1.For Mercedes- Benz VGS3 (on bench) Use FoxFlash to copy the VIN and SCN string then write into the new VGS. And need to e Continue Reading →
The newest Foxflash software is released on March 14, 2023. Now it is able to perform the Continental GPEC2 GPEC3 GPEC4LM GPEC2A ECUs read and write in Boot. Update method: Try to update just connect, run Foxflash Manager and activate it. No need to download, because the protocols are in Continue Reading →
Foxflash/New KT200 March Mega Sales at eobdtool.co.uk: Promotion time: from March 1st to March 31st, 2023 Promotion 1: Buy Foxflash/ New KT200 with discount Promotion 2: Buy any one Foxflash or New KT200 ECU programmer, you can get one free professional Toyota/Lexus Solder- Free Adapter (value € Continue Reading →
Eobdtool.co.uk newly releases a Toyota Lexus BDM/JTAG Solder- free Adapter. It can be used to work with New KT200, Old KT200 and Foxflash ECU programmer for ECU reading and writing without soldering. Toyota Lexus BDM/JTAG Solder- free Adapter comes with one red 26 PIN adapter and one blue Continue Reading →
eobdtool.co.uk engineer makes a test on a new VW Simos 18.1 ECU and confirms that Vident iSmart800 Pro/ Foxflash ECU Chip Tuning Tool works well with Godiag GT105 plus GT107 to diagnose and read this ECU separately. What role does Godiag GT105 and GT107 play in the test? Help you to clear Continue Reading →
