One customer gave feedback: FoxFlash did not read PSA Mev17.4 on Bench, with 12v and 13.5v. If MEV17.4 TC1766 Peugeot could be read with PCMtuner? Answer: Both work but there are 3 possible pinouts. Confirm the wires of terminals are connected well. Pinout 1 Pinout 2 & Continue Reading →
As we all know, winols damos and A2L is very expensive. But if you have a Foxflash ECU Chip Tuning Tool, you can get a tuner account to free download damos files for chiptuning, dtc off and so on. So, how to get a FoxFlash online tuner account? After you get the FoxFlash, you also can obta Continue Reading →
KT200 ECU Chip Tuning Tool can read Renault SID310 by OBD mode both online and offline now. 1.For online working (need internet): You need to download and install the newest KT200 online software- V2022.12.10. It adds Renault Master SID310 via OBD and Audi MD1CP004 SPC 5777 drivers. It’s Continue Reading →
Foxflash ECU Chip Tuning Tool support VW EDC16U31 EEPROM reading and writing on bench. The ECU models supported by Foxflash can be checked from FoxFlash ECU Driver List. Before operation, install and activate foxflash software. Click here to learn more. Then connect Foxflash ECU programmer, bench Continue Reading →
KT200 Offline Workstation USB Dongle has been released at eobdtool.co.uk. It’s friendly for the outdoor ECU tuning where the internet is not accessible or the signal is too weak to connect, and can read & write ECU /TCU via OBD/Bench/Boot/BDM/JTAG as perfectly as KT200 online version. Continue Reading →
The newest software of KT200 ECU programmer V2022.12.10 online update version has released now. Follow this guide to free download and install the software on Win7, Win8/8.1, Win10 or Win11. Free download KT200 software V2022.12.10: Link 1: https://mega.nz/file/1Xk2TZKR#fp5Z14acJD4R0t0iig Continue Reading →
One customer used Foxflash ECU Chip Tuning Tool to read and write his Mercedes- Benz TC1793 CRD3P.00. Read int flash successfully, but when he wrote int flash data with foxflash software, there was an error prompt appearing with the word ‘Your computer is low on memory.’ Eobdtool.co.uk Continue Reading →
OBDSTAR DC706 works well with GUZZI Marelli MIU G4 95640 Motorcycle ECM. It can read ECU info, read & write EEPROM and reset ECU (Virgin) on bench without any issue. All device & accessories required: OBDSTAR DC706 main unit Main cable OBDSTAR P004 adapter+ P004 Jumper 12V2A Charg Continue Reading →
Customer problem: I used Foxflash ecu programmer to do SID309 OBD password unlock stop at 57%. I waited for 20 minutes and nothing was happening. How to continue? eobdtool.co.uk engineer replied: When reading password via OBD (IN CAR), please ensure IMMO system does not become active duri Continue Reading →
