Recently, some customers gave feedback that there is something wrong with the KT200 EU programmer. When they run KT200 software, at the start of the sw it stops at the screen, and no selection available (see the figure 1). Here eobdtool.co.uk shares the related practical solution. The possible c Continue Reading →
Free download the latest software V2022.10.01 for your KT200/KTM200/ECUTuner ECU programmer on Win7, Win8/8.1, Win10 or Win11. It’s available with multi- language (Italian, English, Dutch, French, Spanish, Polish, Portuguese, Czech, Romanian and Turkish). KT200 V2022.10.01 free download Continue Reading →
Many customers want to have a good ECU programmer with cost-effective price. They are confused on KT200, CG FC200 and PCMTuner which are deeply concerned on the market. Here we make a comparative analysis of these three products, hope it help you to make a better decision. Comparison Sheet Continue Reading →
How to test KT200 BENCH BOX yourself? Check the step-by-step guide below. Connect KT200 ECU programmer, Bench Box and computer Open KT200 software (V22.08.20) Click ‘Select Driver’ Then select BENCH MODE>> TOOLS BENCH MODE>> Test for BENCH BOXES>> TEST BENCH BOX V2 Cli Continue Reading →
KT200/KTM200 ECU Programmer software Common problems and solutions 1.The software cannot connect to the server After the normal connection, click “CONNECT”, the “WAIT INTERNET CONNECTION” buffer will pop up, and it has not been connected, and finally the page will pop up Continue Reading →
Topic: Which device can read and write BMW MSV90? Eobdtool.co.uk engineer’s suggestion: KT200, CGDI BMW, FC200/AT200, Yanhua ACDP with module 27 1.KT200/KTM200 (in boot mode): KT200 ECU List Read and write MSV90 DME in KT200 software: Open KT200 software Click on Manual to s Continue Reading →
Eobdtool.co.uk engineer tested and confirmed that VW MPC555/6-VAG EDC16U1 EEPROM can be read and written by KT200/KTM200 ECU programmer in Bench mode without any issue. This is VW MPC555/6-VAG Bosch EDC16U1 ECU module. Before the operation, connect KT200 ECU programmer to VW ECU and compu Continue Reading →
Yanhua ACDP Module 28 is specially designed for Jaguar, Land Rover, Chrysler, Dodge, Fiat, Honda, Jeep and other models of the ZF-9HP gearbox clone in BOOT mode. Compared to the traditional cable connection, it’s simpler, safer, more efficient and reliable. Mini ACDP Module 28 highlights: Continue Reading →
Some guys encounter this problem:After getting ecu bench tool and installing the application, registration is complete. I had try it right away on edc16u34 and it won’t read ID. always says S1 and S2 pinout error. Solution: Make sure the driver has been installed and the wiring connection Continue Reading →
