Here shares the user guide of New KT200 ECU programmer. Main contents: Where to download New KT200 software? How to install New KT200 software? How to register New KT200 account? How to activate New KT200? How to install New KT200 driver? New KT200 overview: New KT200 ECU Programme Continue Reading →
Good news!!! The newest KT200 ECU programmer software V2022.12.10 has added two drivers: Renault Master SID310 by OBD and Audi MD1CP004 SPC 5777. How to get the new version? 1.Free Download KT200 Software 2022.12.10 online version https://mega.nz/file/1Xk2TZKR#fp5Z14acJD4R0t0iigAguNOJ2e9mf Continue Reading →
Update! More customer feedback about which ECU can read, write and do checksum correction with KT200 ECU programmer. Abarth: Bench mode full system marelli abarth clone Ecu iate 9gf Audi: Full backup edc16u34 audi a3 in bench mode OK Read & write obd okey edc15p audi OK Audi A4 Continue Reading →
There is a new ECU programmer released at eobdtool.co.uk recently. It looks like KT200. That is FoxFlash. Many customers are curious about the difference between these two products and which one is better. So we have collected the related info for comparison. Check the details in this post carefu Continue Reading →
KT200/KTM200 can read and write much ECU under Win7/ Win10 32 bit/ 64bit (Driver signature enforcement disabled). The System needs a good internet connection to function correctly. Here have collected a lot of customer feedback about KT200 success and failure test report. Customer’s posit Continue Reading →
Recently, some customers gave feedback that there is something wrong with the KT200 EU programmer. When they run KT200 software, at the start of the sw it stops at the screen, and no selection available (see the figure 1). Here eobdtool.co.uk shares the related practical solution. The possible c Continue Reading →
How to test KT200 BENCH BOX yourself? Check the step-by-step guide below. Connect KT200 ECU programmer, Bench Box and computer Open KT200 software (V22.08.20) Click ‘Select Driver’ Then select BENCH MODE>> TOOLS BENCH MODE>> Test for BENCH BOXES>> TEST BENCH BOX V2 Cli Continue Reading →
Eobdtool.co.uk engineer tested and confirmed that VW MPC555/6-VAG EDC16U1 EEPROM can be read and written by KT200/KTM200 ECU programmer in Bench mode without any issue. This is VW MPC555/6-VAG Bosch EDC16U1 ECU module. Before the operation, connect KT200 ECU programmer to VW ECU and compu Continue Reading →
KT200/KTM200 ECU Programmer supports OBD/BOOT/BDM/JTAG and multiple protocols for Bosch, Magneti Marelli, Continental, Denso, Delco, Temic or Siemens covering up to 5400 ECU, over 500 TCU, i.e Volvo MPS6, VAG DQ400e/SQ100, Jeep 9H28 TCUs. With the ECUHelp 3.0 software, customers also can get free Continue Reading →
