When you use KT200/KTM200 to perform ECU maintenance chip tuning, DTC code removal on BOSCH, MAGNETI MARELLI, CONTINENTAL, Denso, DELCO, TEMIC or SIEMENS by bench, boot, BDM/JTAG and OBD mode, you’d better install KT200 software V22.08.20 on Win10 32/64bit with Intel i5, 5th generation above and Continue Reading →
The newest V22.08.20 KT200/KTM200 software solved the problem that the mobile network cannot connect to the server, added the boot screen to solve the long-term unresponsiveness of the click software and optimized the virtual data read and write functions. Here eobdtool.co.uk engineer offers the Continue Reading →
KT200 ECU programmer read Audi Med9.1 EEPROM via bench mode approx. 3 Min, no issues! Preparation: KT200/KTM200 ECU programmer Full Version (incl. KT200 main unit, Bench box, network cable, pinout line) Audi Med9.1 ECU Computer KT200 BOSCH MED9.1 (MPC561/2)- Audi Pinout (Also applies t Continue Reading →
If you have the problem ‘Windows encountered a problem installing the drivers for your device’ when installing KT200 software, just disable driver signature enforcement to solve this error quickly by the following guide. Go to Taskbar settings>> Home Enter Windows settings inter Continue Reading →
KT200/KTM200 can read and write ECU via OBD/Bench/BOOT/BDM/JTAG. Eobdtool.co.uk engineer has tested and confirmed it works on BMW EDC16 C1, HONDA EDC17 C58, VAG MG1CS001, AUD SH7055 and SAK TC1738 without any issue. The test: BMW EDC16 C1 MPC555/6- in bench mode HONDA EDC17 C58 TC1793- in Continue Reading →
Which tool can read and write DSG gearbox data for VAG DQ200/DQ250 (02E)? Here recommend Godiag GT107 ECU IMMO kit, Kess V2, PCMTuner, Tactrix Openport 2.0 and CG FC200, which have been tested and confirmed all work well for VAG by eobdtool.co.uk engineer. GODIAG GT107 ECU IMMO Kit is a DS Continue Reading →
Which ECU programmer is good for VAG/BMW ECUs? Here are some suggestions for reference. 1.VVDI Prog can read edc17x for BMW and VAG. 2.If got a passthru like scanmatik 2 pro, PCMFLASH is suggested for flashing, it can do em by bench module 71 and/or 53 or OBD other modules depending on ECU type, Continue Reading →
GODIAG GT107 ECU IMMO Kit is a DSG gearbox connection adapter.This adapter has automatic and manual selection for PCMFlash software. For data reading and writing, you can choose “Auto”, and for diagnosis you can choose ”Manual”. For other software kessv2, DQ200, DQ250, DQ500 you can also choo Continue Reading →
Xtool X100 PAD3(X100 PAD Elite) is a professional tablet key programmer which not only provides customers with key programming but also supplies advanced special functions. Equipped with KC100 key programmer, X100 PAD3 can perform: Key programming,oil service light reset, timing belt service ligh Continue Reading →
