Foxflash Supports FCA GPEC2 GPEC3 GPEC4LM GPEC2A ECUs Read and Write in Boot mode

The Foxflash ECU Programmer can support FCA GPEC2 GPEC3 GPEC4LM GPEC2A ECUs read and write in Boot mode since March 14, 2023.Click here to check the detailed ECU models. Today we’ll share the Pinout to these ECUs.

 

  • BAM SPC5674 CONTINENTAL GPEC2A FCA Pinout

Connect with the multifunction cable the CNF1 on the PCB.

Use the driver:

→ TOOLS BOOT MODE

→ MOTOROLA FREESCALE BAM

→ CONTINENTAL GPEC2A

foxflash fca gpec2 gpec3 gpec4lm gpec2a boot pinout 1

 

  • BAM SPC5674 CONTINENTAL GPEC3 FCA Pinout

Connect with the multifunction cable the CNF1 on the PCB.

Use the driver:

→ TOOLS BOOT MODE

→ MOTOROLA FREESCALE BAM

→ CONTINENTAL GPEC3

foxflash fca gpec2 gpec3 gpec4lm gpec2a boot pinout 2

 

  • BAM SPC5674 CONTINENTAL GPEC4 FCA Pinout

Connect with the multifunction cable the CNF1 signal on the PCB.

Use the driver:

→ TOOLS BOOT MODE

→ MOTOROLA FREESCALE BAM

→ FCA CONTINENTAL GPEC4

foxflash fca gpec2 gpec3 gpec4lm gpec2a boot pinout 3

 

  • BAM SPC5674 CONTINENTAL GPEC4LM FCA Pinout

Connect with the multifunction cable the CNF1 signal on the PCB.

Use the driver:

→ TOOLS BOOT MODE

→ MOTOROLA FREESCALE BAM

→ FCA CONTINENTAL GPEC4LMfoxflash fca gpec2 gpec3 gpec4lm gpec2a boot pinout 4
foxflash fca gpec2 gpec3 gpec4lm gpec2a boot pinout 5

UK Professional OBD2 Tools Online Shop

(Visited 313 times, 1 visits today)