How Foxflash Bench Box Do a Self-test?

Auto ECU Programmer

Foxflash bench box works with OBD and direct connect bench. If the bench box doesn’t have a connection, how to do a self-test?

 

Here is the simple operation guide.

1.Connect Foxflash tool and a computer via the USB cable

Connect the Bench Box to foxflash ECU programmer and power it through the round jack of the bench box itself or from the round jack of foxflash.

how to do foxflash bench box self test 1 how to do foxflash bench box self test 2

2.Run foxflash Manager

Select TOOLS BENCH MODE>> TEST for BENCH BOXES>> TEST BENCH BOX V2

Click Info to read the test note

how to do foxflash bench box self test 3

This driver is useful for testing the Bench Box V.2

During the test:

The relays will be triggered at different speeds.

The red LED will flash several times.

3.Click Start Test

Make sure the bench box is connected without ECU and powered.

how to do foxflash bench box self test 4

Test bench box V2 successfully

how to do foxflash bench box self test 5

NOTE:

If the bench box self-test result is fine, but foxflash software has no communication, the problem may be the voltage, ECU or wiring connection. Please try to check one by one.

 

UK Professional OBD2 Tools Online Shop

(Visited 51 times, 1 visits today)

Who Views This Also Viewed:

  1. How to Do Self-test for KT200 Bench Box?
  2. FoxFlash Read and Write VW EDC16U31 on Bench Successfully
  3. FoxFlash Read Full VW EDC16U34 OK on Bench
  4. Foxflash Successfully Unlocked VAG SIMOS PCR2.1 Via OBD/Bench Without Opening ECU
  5. Foxflash/KT200/PCMTuner/ECU Bench Tool Read/ Write VW MED17.5 ECU on Bench
, ,