Is it possible to clone BMW TCM with OBDSTAR DC706? Yes. BMW ZF 6HP19/6HP21/6HP26/6HP28 and GETRAG DKG 436 Gen 1 TC1766 TCM are supported by DC706 with TCM V30.01 on bench. The OBDSTAR P003 Kit is required for ZF 6HP TCM. It has been tested and confirmed that DC706 can successfull Continue Reading →
Here shares the user guide of New KT200 ECU programmer. Main contents: Where to download New KT200 software? How to install New KT200 software? How to register New KT200 account? How to activate New KT200? How to install New KT200 driver? New KT200 overview: New KT200 ECU Programme Continue Reading →
Customer problem: I want to change the language of my CG FC200 to Polish, but I get the prompt “The device is not licensed for this language, please contact the developer.” Does it mean Polish is not supported? How to do? For this problem, the engineer of eobdtool.co.uk gives the solution belo Continue Reading →
OBDSTAR DC706 currently clones Cadillac TCM 6L45, 6L50, 6L80, 6L90, 6T80 and T87A by bench mode without any issue. It can read ECU info, read/write EEPROM and Flash perfectly. Brand ECU Brand Type Dump ECU Info. Read EEPROM Write EEPROM R/W Flash Comm. Mode CADILLAC GM 6L45 ✔ ✔ ✔ ✔ BENC Continue Reading →
One customer gave feedback: FoxFlash did not read PSA Mev17.4 on Bench, with 12v and 13.5v. If MEV17.4 TC1766 Peugeot could be read with PCMtuner? Answer: Both work but there are 3 possible pinouts. Confirm the wires of terminals are connected well. Pinout 1 Pinout 2 & Continue Reading →
As we all know, winols damos and A2L is very expensive. But if you have a Foxflash ECU Chip Tuning Tool, you can get a tuner account to free download damos files for chiptuning, dtc off and so on. So, how to get a FoxFlash online tuner account? After you get the FoxFlash, you also can obta Continue Reading →
KT200 ECU Chip Tuning Tool can read Renault SID310 by OBD mode both online and offline now. 1.For online working (need internet): You need to download and install the newest KT200 online software- V2022.12.10. It adds Renault Master SID310 via OBD and Audi MD1CP004 SPC 5777 drivers. It’s Continue Reading →
Foxflash ECU Chip Tuning Tool support VW EDC16U31 EEPROM reading and writing on bench. The ECU models supported by Foxflash can be checked from FoxFlash ECU Driver List. Before operation, install and activate foxflash software. Click here to learn more. Then connect Foxflash ECU programmer, bench Continue Reading →
KT200 Offline Workstation USB Dongle has been released at eobdtool.co.uk. It’s friendly for the outdoor ECU tuning where the internet is not accessible or the signal is too weak to connect, and can read & write ECU /TCU via OBD/Bench/Boot/BDM/JTAG as perfectly as KT200 online version. Continue Reading →
